document number: 51041 for tec hnical questions, contact: sfer@vishay.com www.vishay.com revision: 08-feb-11 see al so application note: www.vishay.com/doc?51001 and www.vishay. com/doc?52029 11 3 mm square surface mount miniature trimmer single-turn cermet sealed ts3 vishay sfernice features ? 0.125 w at 70 c ? small size for optimum packaging density ? suitable for both manual and automatic operations ? compliant to rohs directive 2002/95/ec dimensions in millimeters (inches) 0.25 mm ( 0.010") ts3yj recommended soldering areas 2.2 0.2 (0.087 0.008) 0.15 (0.006) 1.3 0.1 (0.051 0.004) 0.66 0.1 (0.026 0.004) 2 places 2.3 0.2 (0.091 0.008) 1.5 0.15 (0.059 0.006) 2 places 1.47 0.15 (0.058 0.006) 2 3 1 adjustment slot 0.52 (0.020) wide x 1.93 (0.076) long x 0.51 (0.020) deep 3.2 + 0.4/- 0.2 (0.126 + 0.016/- 0.008) 3.5 0.2 (0.138 0.008) b 1.6 (0.063) 1.6 (0.063) 4.5 (0.177) 0.65 (0.026) 1.1 (0.043) 0.6 (0.024) 0.6 (0.024) 1.1 (0.043) 1.6 (0.063)
ts3 vishay sfernice 3 mm square surface mount miniature trimmer single-turn cermet sealed www.vishay.com for technical questions, contact: sfer@vishay.com document number: 51041 12 see also application note: www.vishay.com/doc?51001 and www.vishay.com/doc?52029 revision: 08-feb-11 electrical specifications resistive element cermet electrical travel 220 resistance range 10 ? to 2 m ? stocked range 1 k ? to 100 k ? standard series 1 - 2 - 5 tolerance standard 20 % circuit diagram power rating 0.125 w at 70 c temperature coefficient (max.) ? 100 ? 150 ppm/c/> 100 ? 100 ppm/c limiting element voltage (max.) 200 v contact resistance variation 3 % or 3 ? end resistance 1 % or 3 ? dielectric strength (rms) 500 v (sea level) insulation resistance (500 v dc ) 100 m ? mechanical specifications mechanical travel 250 operating torque (max. ncm) 0.5 end stop torque (min. ncm) 2 unit weight (max. g) 0.1 mechanical life (cycles) 50 environmental specifications temperature range - 55 c to + 125 c sealing sealed container ip67 msl level 1 soldering recommendations recommended reflow profile 2, see application note www.vishay.com/doc?52029 standard resistance element data resistance part marking code resistance code 10 a1 100 20 21 200 50 51 500 100 a2 101 200 22 201 500 52 501 1k a3 102 2k 23 202 5k 53 502 10k a4 103 20k 24 203 50k 54 503 100k a5 104 200k 25 204 500k 55 504 1m a6 105 2m 26 205 a c b cw (2) (3) (1)
ts3 3 mm square surface mo unt miniature trimmer single-turn cermet sealed vishay sfernice document number: 51041 for tec hnical questions, contact: sfer@vishay.com www.vishay.com revision: 08-feb-11 see al so application note: www.vishay.com/doc?51001 and www.vishay. com/doc?52029 13 packaging ordering information (part number) model style ohmic value tolerance packaging special number ts3 yj from 10 ? to 2 m ? 503 = 50 k ? m = 20 % r15 = reel 1000 pieces (if applicable) given by vishay for custom design description (for information only) ts3 yj 50k 20 % tr e3 model style value tolerance special packaging lead finish ? 13 0.51 ? 21.01 0.79 ? 178 2.03 equal spaced 3 places 1.78 min. 12.40 + 2.00 2.67 0.2 60 2.03 2.5 0.1 4.0 0.1 0.3 0.1 54 0k 5.52 0.18 3.8 0.2 1.5 0.2 1.5 0.1 2.0 0.1 4.0 0.1 1.75 0.1 12 0.2 reel of 1000 pieces 15 50 m 3r j s3 y t
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
